Re-Setting the Lifetime Pump Message : Signwarehouse

Re-Setting the Lifetime Pump Message Print

Created by: Keith McCallum

Modified on: Tue, Oct 6, 2020 at 10:32 AM

Hold the UP DOWN & RIGHT Buttons down, continue to hold these buttons down while Powering on the machine.

Once it boots up into the Maintenance Mode you can release the 3 buttons.

Press the RIGHT Button until you see “Parameter”

Press ENTER

You should see the word “INITAILIZE”

Press ENTER

Press the RIGHT Button until you see the word “PUMP”

Press ENTER

You should see the message “Initialize ok”

Press ENTER

Once it has initialized the setting press CANCEL as far back as possible

Turn the machine off

Now turn the machine on again normally

Keith is the author of this solution article.

Did you find it helpful? Yes No

Re-Setting the Lifetime Pump Message Print